notice of the component's install and run

1. For stove's temperature and components with carry even, before installing want to carried on to go together with the component, each resistivity control at+/-10% the following.

2. Because of the carborundum component quality frailty, at the gearing maintain want to be carefully, the in order to prevent damage.

3. The cooker wants to be gradually while starting switch on electricity circulate the slowness rises to press, can't add the full burden once, otherwise would because of pounding at the electric current over result in component damage greatly.

4. Use the component must provide with to adjust to press the transformer or can control to adjust to press the machine and electric voltage, the electric current forms and temperatures to control appearance etc. automatically.Oxidize because of the component in use process, gradual increment of electric resistance, in order to keep a heat of normal, should raise to use the electric voltage.When the electric voltage raise the tallest limit of transformer use and still can't satisfy the request, can stop a heat of change component to connect the line method to continue again to use.

5. the cooker is in over a long period of time circulate process, the individual component need to be replace because of a certain reason but damage, want according to at that time the component resistivity growth circumstance, chose to repair the feat component of resistivity, can't take the new component to replace arbitrarily.If the component damage is more or the resistivity increased greatly, can't attain a heat of hour needed and had better replace all new component.The component that changes down re- measures to mark its electric resistance value, going together to use in the low temperature area.

6. The stoves which is new or unused for long time must be dried before used.Had better use old components and hot sources.
7 . There is humidity if burning appraturses or materials in the heated process. The cooker must have exhaust bore to expel water or harmful waste gases in the stove. Not influencing component's life.